Mitel 6867i Administrator's Manual page 115

PARAMETER PARAMETER IN
IN MITEL WEB UI
IP PHONE UI
Check Check Certificate
Hostnames Hostnames
N/A Trusted
Certificates
Filename
TYPE OF SERVICE (TOS), DSCP
Advanced Network Settings include Type of Service (ToS) and Differentiated Services Code
Point (DSCP) for the IP phones.
PARAMETER PARAMETER IN
IN MITEL WEB UI
IP PHONE UI
Type of Service SIP
SIP
Type of Service RTP
RTP
PARAMETERS IN DESCRIPTION
CONFIGURATION
FILES
https validate Enables or disables the HTTPS validation
hostname of hostnames on the phone.
For more information, see Chapter 4,
"HTTPS Server Certificate Validation"
page
https user Specifies a file name for a .PEM file
certificates located on the configuration server. This
file contains the User-provided
certificates in PEM format. These
certificates are used to validate peer
certificates.
Note: To install a user-provided certificate
through a configuration server using the
HTTPS protocol, you must temporarily
disable the "https validate certificates".
After the certificate is installed and you can
re-enable the "https validate
certificates" parameter.
For more information, see Chapter 4,
"HTTPS Server Certificate Validation"
page
PARAMETERS IN DESCRIPTION
CONFIGURATION
FILES
tos sip The Differentiated Services Code Point
(DSCP) for SIP packets.
For more information, see Chapter 4,
"Type of Service (ToS), Quality of Service
(QoS), and DiffServ QoS"
tos rtp The Differentiated Services Code Point
(DSCP) for RTP packets.
For more information, see Chapter 4,
"Type of Service (ToS), Quality of Service
(QoS), and DiffServ QoS"
Administrator Level Options
4-37.
4-37.
on page
on page
on
on
4-43.
4-43.
3-45