Mitel 6867i Administrator's Manual page 391

• Internal
• Emergency
• Priority
• Auto call distribution
• Community 1
• Community 2
• Community 3
• Community 4
4. Click Save Settings to save your changes.
CALL WAITING TONES
Call Waiting is a feature that tells you if a new caller is trying to contact you when you are
already on the phone. A discreet tone alerts you to the new caller, so you can answer your
second incoming call by putting your first caller on hold.
The IP phones use the following Bellcore-specified call waiting tones.
BELLCORE PATTERN
CALL-WAITING ID
TONE
CallWaitingTone 1 1
Bellcore-dr2 2
CallWaitingTone2
Bellcore-dr3 3
CallWaitingTone3
Bellcore-dr4 4
CallWaitingTone4
For Asterisk and BroadWorks servers, call waiting tones are specified by the default Bellcore
tones indicated in the table
For Sylantro servers, call waiting tones are specified by the Bellcore tones you configure in the
Mitel Web UI or the configuration files. See the table
page 128.
Reference
For more information about enable/disabling call waiting on the IP Phone, see the section,
Waiting" on page 5-74.
PATTERN MINIMUM
DURATION
(MS)
Tone On 270
Tone On 90
Tone Off 90
Tone On 90
Tone Off 90
Tone On 90
Tone On 90
Tone Off 90
Tone On 270
Ring Tone Pattern (Asterisk/BroadWorks Servers)
Operational Features
NOMINAL
DURATION
(MS)
300
100
100
100
100
100
100
100
300
Ring Tone Pattern (Sylantro Servers)
MAXIMUM
DURATION
(MS)
330
110
110
110
110
110
110
110
330
on page 127.
on
"Call
5-130