Mitel 6867i Administrator's Manual page 305

Configuring DHSG using the IP Phone UI
Use the following procedure to configure DHSG using the IP Phone UI.
IP PHONE UI
For the 6865i:
1. Press on the phone to enter the Options List.
2. Select Preferences.
3. Select Set Audio.
4. Select DHSG and toggle the DHSG support ON or OFF
5. If you select "Off", press Done to save your setting.
6. Press Set or Done to save your setting. The setting applies immediately to the phone.
For the 6867i/6869i:
1. Press to enter the Options List.
2. Navigate to the Audio > Headset option and press the
3. Press the 2 key to highlight DHSG.
4. With DHSG highlighted press the 4 key to move to selection column.
5. Use the 5 and 2 keys to scroll through and choose whether or not to enable DHSG. Valid
values are:
• DHSG is OFF (default)
• DHSG is ON
6. Press the Save softkey to save your changes.
Operational Features
button or Select softkey.
5-44