Mitel 6867i Administrator's Manual page 987

RTCP SUMMARY REPORTS
PARAMETER –
sip rtcp summary reports
transport protocol
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
ALPHANUMERIC INPUT ORDER FOR USERNAME PROMPTS
Note: Applicable to the 6863i and 6865i IP Phones only.
PARAMETER –
username alphanumeric input
order
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the transport protocol used for sending RTCP summary
reports. This parameter takes effect when at least one line has RTCP
summary reports enabled.
Note: The parameter "sip symmetric udp signaling" is effective when
the transport protocol for RTCP summary reports is set to UDP.
Numeric
1 (UDP)
0 (TCP/UDP)
1 (UDP)
2 (TCP)
sip rtcp summary reports transport protocol: 2
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
When enabled, this parameter changes the default behavior of the
keypad input order during username prompts from uppercase letters
> digit > lowercase letters to digit > uppercase letters > lowercase
letters.
For example, when pressing "2" on the keypad during a username
prompt with this parameter disabled (default) each key press will
successively enter the letter/digit A, B, C, 2, a, b, c. When enabled,
each key press will successively enter 2, A, B, C, a, b, c.
Integer
0 (Uppercase letters first
0-1
0 (Uppercase letters first)
1 (Digit first)
username alphanumeric input order: 1
Advanced Operational Parameters
A-289