Configurable Display For Blank Blf/List Softkeys - Mitel 6867i Administrator's Manual

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide

CONFIGURABLE DISPLAY FOR BLANK BLF/LIST SOFTKEYS

Note: Applicable to the 6867i, 6869i, 6873i IP Phones only.
PARAMETER –
keys noname symbol
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
keys noname hidden
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-258
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
By default, when softkeys are configured as BLF/List keys on the
phone but there are not enough members in the BLF/List on the
BroadSoft server side, then a series of question marks (i.e. "? ???")
are displayed on screen beside some of the softkeys. The question
marks can be replaced with a different symbol/character by defining
this parameter.
Any character placed within quotation marks
"?"
Any character (can be left empty as well)
keys noname symbol: "e"
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
If this parameter is set to "0" (disabled) then a series of question
marks (or the symbol configured as defined by the "keys noname
symbol" parameter) will be displayed on the screen indicating blank
BLF/List softkeys.
If this parameter is set to "1" (enabled) then the series of question
marks (or the symbol configured as defined by the "keys noname
symbol" parameter) will be hidden and nothing will be shown on the
screen beside the affected softkeys.
Boolean
0
0-1
0 (disabled)
1 (enabled)
keys noname hidden: 1