Mitel 6867i Administrator's Manual page 396

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
11. In the "Line" field, select a line number that is actively registered to the appropriate SIP
proxy you are using.
12. In the "BLF List URI" field, enter the name of the BLF list defined on the BroadSoft Broad-
Works Busy Lamp field page for your particular user.
For example, sip:9@192.168.104.13.
Note: The value of the BLF/List URI parameter must match the list name configured.
Otherwise, no values display on the screen and the feature is disabled.
13. Select the line state (idle, connected, incoming, outgoing, busy) that you want to apply to
the BLF softkey or programmable key.
14. Click Save Settings to save your changes.
CONFIGURING XML FOR DIRECTED CALL PICKUP
Use the following procedure to configure XML for Directed Call Pickup in the configuration files.
Notes:
1. Before implementing this procedure, you must create an XML application that the
phone uses when the XML softkey or programmable key is pressed. This XML
application must be entered as a URI in the "Value" field of the XML key. For
information about creating an XML script, see the XML Developer's Guide.
2. You must enable Directed Call Pickup before performing these procedures. See
"Enabling/Disabling Directed Call Pickup"
CONFIGURATION FILES
To set XML in the configuration files for Directed Call Pickup, see Appendix A, the section,
"Softkey/Programmable Key/Keypad Key/Expansion Module Key/Hard Key Parameters"
page A-217.
Use the following procedure to configure XML for Directed Call Pickup in the Mitel Web UI.
MITEL WEB UI
1. Click on Basic Settings->Preferences->Directed Call Pickup Settings.
2. Enable the "Directed Call Pickup" field by checking the check box.
3. (Optional) Enter a prefix in the "Directed Call Pickup Prefix" field. For example, *98.
This prefix is appended to the beginning of the Directed Call Pickup number when dialed
from the BLF or BLF/List softkey.
5-135
on page 5-132.
on