Mitel 6867i Administrator's Manual page 786

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
PARAMETER –
sip lineN backup registrar ip
(where N = line number)
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
sip lineN backup registrar port
(where N = line number)
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
sip lineN registration period
(where N = line number)
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-88
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
The address of the backup registrar (typically, the backup SIP proxy)
for which the IP phone uses to send REGISTER requests if the
primary registrar is unavailable.
A global value of 0.0.0.0 disables backup registration. However, the
phone is still active and you can dial using username@ip address of
the phone.
If the backup registrar IP address is set to 0.0.0.0 for a per-line basis
(i.e, line 1, line 2, etc.), then the backup register request is not sent,
the "No Service" message does not display, and the message
waiting indicator (MWI) does not come on.
IP address or fully qualified Domain Name
0.0.0.0
N/A
sip line1 backup registrar ip: 192.168.0.102
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
The backup registrar's (typically the backup SIP proxy) port number.
Integer
0
N/A
sip line1 backup registrar port: 5060
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
The requested registration period, in seconds, from the registrar.
Integer
0
0 to 2147483647
sip line1 registration period: 3600