Mitel 6867i Administrator's Manual page 528

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
Enabling/Disabling Directories and Renaming Labels
Administrators have the option of enabling or disabling the respective directories on the phone
as well as changing the default folder labels. These actions can be performed using the
configuration files or through the phone's UI.
Enabling/Disabling Directories and Renaming Labels Using the Configuration Files
Use the following procedures to enable/disable directories and rename directory folder labels.
CONFIGURATION FILES
For specific parameters you can set in the configuration files see Appendix A, the section,
"Enhanced Directory Settings"
Enabling/Disabling Directories and Renaming Labels Using the Phone UI
Use the following procedure on the phone's UI to enable/disable directories and rename
directory folder labels.
IP PHONE UI
For the 6863i/6865i:
1. Press the
2. Select Directory.
3. Select External Sources.
4. Navigate to the Directory Source you wish to enable/disable (e.g. LDAP) and press the 4
Enter key.
Note: CSV 1 and 2 are enabled by default. All other Directory sources are disabled
by default.
5. Navigate to the State setting and press the 4 Enter key.
6. Select a state (ON or OFF).
7. Press the
Your selection will be immediately applied to the phone.
8. Navigate to the Label setting and press the 4 Enter key.
9. Using the dialpad keys, enter in a name for the respective directory folder.
10. Select 4Set.
Your selection will be immediately applied to the phone.
For the 6867i/6869i:
1. Press
5-267
on
page A-126
key on the phone to enter the Option List.
key or select 4Set.
on the phone to enter the Options List.
.