Mitel 6867i Administrator's Manual page 724

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
PARAMETER –
auto resync mode
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-26
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Determines whether the configuration server automatically updates
the configuration files only, the firmware only, both the firmware and
configuration files, or disables automatic updates.
This parameter works with TFTP, FTP, HTTP and HTTPS servers.
Valid values are:
• None (0) - Disable auto-resync
• Configuration Files (1) - Updates the configuration files on the IP
phone automatically at the specified time if the files on the server
have changed.
• Firmware (2) - Updates the firmware on the IP phone
automatically at the specified time if the files on the server have
changed.
• Both (3) - Updates the configuration files and firmware
automatically at the specified time if the files on the server have
changed.
Notes:
• If a user is accessing the Mitel Web UI, they are not informed of
an auto-reboot.
• Any changes made using the Mitel Web UI or the IP phone UI are
not overwritten by an auto-resync update. Auto-resync affects the
configuration files only. However, the settings in the Mitel Web UI
take precedence over the IP phone UI and the configuration files.
• The resync time is based on the local time of the IP phone.
• If the IP phone is in use (not idle) at the time of the resync check,
the reboot occurs when the phone becomes idle.
• The automatic update feature works with both encrypted and plain
text configuration files.
Integer
0
0 (none)
1 (configuration files only)
2 (firmware only)
3 (configuration files and firmware)
auto resync mode: 1