Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
CONFIGURATION FILES
For specific parameters you can set in the configuration files for configuring the Preferred Line
and Preferred Line Timeout, see Appendix A, the section,
on
Timeout"
page A-178
Use the following parameters to configure preferred line focus using the Mitel Web UI.
MITEL WEB UI
1. Click on Basic Settings->Preferences->General.
2. In the "Preferred Line" field, select a preferred line to switch focus to after incoming or
outgoing calls end on the phone. Valid values are:
•
None (disables the preferred line focus feature)
•
1 to N
Default is 1.
For example, if you set the preferred line to "1", when a call (incoming or outgoing) ends
on the phone (on any line), the phone switches focus back to Line 1.
3. In the "Preferred Line Timeout" field, enter the amount of time, in seconds, that the phone
switches back to the preferred line after a call (incoming or outgoing) ends on the phone,
or after a duration of inactivity on an active line. Default is 0. Valid values are 0 to 999.
4. Click Save Settings to save your changes.
5-89
.
"Preferred Line and Preferred Line