Mitel 6867i Administrator's Manual page 109

BASIC NETWORK SETTINGS
If Dynamic Host Configuration Protocol (DHCP) is enabled, the IP phone automatically
configures all of the Network settings. If the phone cannot populate the Network settings, or if
DHCP is disabled, you can set the Network options manually.
PARAMETER PARAMETER IN
IN MITEL WEB UI
IP PHONE UI
DHCP DHCP
IP Address IP Address
Subnet Mask Subnet Mask
Gateway Gateway
PARAMETERS IN DESCRIPTION
CONFIGURATION
FILES
dhcp Enables or disables DHCP. Enabling
DHCP populates the required network
information. The DHCP server serves the
network information that the IP phone
requires. If the IP phone is unable to get
any required information, then you must
enter it manually. DHCP populates the
following network information:
IP Address, Subnet Mask, Gateway,
Domain Name System (DNS) servers,
TFTP, HTTP HTTPS, and FTP servers,
and Timer servers.
Note: For DHCP to automatically populate
the IP address or qualified domain name
for the TFTP server, your DHCP server
must support Option 66. The IP phones
also support Option 60 and 43.
For more information, see
page
ip IP address of the IP phone. To assign a
static IP address, disable DHCP.
For more information, see
Network Settings Manually"
subnet mask Subnet mask defines the IP address range
local to the IP phone. To assign a static
subnet mask, disable DHCP.
For more information, see
Network Settings Manually"
default gateway The IP address of the network's gateway
or default router IP address. To assign a
static Gateway IP address, disable DHCP.
For more information, see
Network Settings Manually"
Administrator Level Options
"DHCP"
4-4.
"Configuring
on page
"Configuring
on page
"Configuring
on page
on
4-23.
4-23.
4-23.
3-39