Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
phone to retain the defined position of the programmed softkey. Using the example above, if
the "collapsed softkey screen" parameter is disabled, the "Home" speeddial softkey will retain
its position appearing on the third top softkey position on the LCD display.
Notes:
1. The "collapsed softkey screen" parameter applies to both top and bottom softkeys
and is enabled by default.
2. When the "collapsed softkey screen" parameter is disabled, bottom softkeys
configured with a function that is to be displayed only in specific states will be
displayed as a blank softkey in all other states. For example, if a bottom softkey is
configured with speeddial functionality in the connected, incoming, outgoing, and
busy states, when the phone is idle, the softkey will be blank (i.e. no label is
displayed) and will not be functional.
OFFSET PARAMETERS
Complementing the "collapsed softkey screen" parameter are the following two additional
parameters giving Administrators more control over softkey positioning:
collapsed softkey screen offset bottom: Defines the offset for locking or collapsing the
•
bottoms softkeys.
collapsed softkey screen offset top: Defines the offset for locking or collapsing the top
•
softkeys.
If the "collapsed softkey screen" parameter is enabled (i.e. defined as "1") and an offset
parameter such as "collapsed softkey screen offset bottom: 4" is defined, the first four bottom
softkeys will not be taken into consideration when collapsing (i.e. essentially locking the first
four bottom softkeys and collapsing the rest).
Alternatively, the inverse is true whereby, if the "collapsed softkey screen" parameter is
disabled (i.e. defined as "0") and an offset parameter such as "collapsed softkey screen offset
5-151
6869i Example - Non-Collapsed Mode