Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
Configuring the LAN Port and PC Port
You can configure the Ethernet port transmission method to use on the IP phones using the
configuration files, the IP Phone UI, or the Mitel Web UI.
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
"Network Settings"
IP PHONE UI
For the 6863i/6865i:
1. Press
2. Select Administrator Menu.
3. Select Network Settings.
4. Select Ethernet.
5. Select LAN Port Link.
6. Select a negotiation method to use on port 0 and press Done. Valid values are:
•
AutoNegotiation
•
Full 10Mbps
•
Full 100Mbps
•
Full 1000Mbps (applicable for the 6865i)
•
Half 10Mbps
•
Half 100Mbps
•
Half 1000Mbps (applicable for the 6865i)
7. Default is AutoNegotiation.
8. Select PC Port Link.
9. Select a negotiation method to use on port 1and press Done. Valid values are:
•
AutoNegotiation
•
Full 10Mbps
•
Full 100Mbps
•
Full 1000Mbps (applicable for the 6865i)
•
Half 10Mbps
•
Half 100Mbps
•
Half 1000Mbps (applicable for the 6865i)
10. Default is AutoNegotiation.
4-27
on
page A-9.
on the phone to enter the Options List.