Mitel 6867i Administrator's Manual page 110

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
PARAMETER
IN
IP PHONE UI
Primary DNS
Secondary
DNS
Hostname
Ethernet
LAN Port Link
PC Port Link
PC Port
Enabled
(6863i and
6865i)
Enable
PassThru Port
(6867i, 6869i,
and 6873i)
3-40
PARAMETER IN PARAMETERS IN
MITEL WEB UI CONFIGURATION
FILES
Primary DNS dns1
Secondary DNS dns2
Hostname hostname
N/A
LAN Port ethernet port 0
PC Port ethernet port 1
PC Port pc port passthrough
PassThru enabled
Enable/Disable
(6863i and
6865i)
PC Port
PassThru
Enable/Disable
(6867i, 6869i,
and 6873i)
DESCRIPTION
Primary DNS server IP address. For any of
the IP address settings on the IP phone a
domain name value can be entered
instead of an IP address. With the help of
the DNS servers the domain names for
such parameters can then be resolved to
their corresponding IP addresses.
To assign static DNS addresses, disable
DHCP.
Note: If a host name is configured on the
IP phone, you must also set a DNS.
For more information, see
Network Settings Manually"
A service that translates domain names
into IP addresses. To assign static DNS
addresses, disable DHCP.
For more information, see
Network Settings Manually"
Specifies the hostname DHCP Option 12
that the phone sends with the DHCP
Request packet.
For more information, see
12 Hostname on the IP Phone"
page 4-13.
The send (TX) and receive (RX)
negotiation to use on the Ethernet LAN
Port and Ethernet PC Port for transmitting
and receiving data over the LAN or to/from
your PC, respectively.
For more information on configuring the
LAN and PC port negotiation, see
"Configuring LAN and PC Port
Negotiation" on page 4-23.
"Configuring
on page 4-23.
"Configuring
on page 4-23.
"Using Option
on