Mitel 6867i Administrator's Manual page 260

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
The IP phone uses the protocol you select to download new firmware and configuration
files from the configuration server. Use the following table to configure the applicable server.
TFTP
• Enter an IP address or fully qualified domain name in the "TFTP Server" field.
• Enter the path name in the "TFTP Path" field for which the configuration files reside on the
TFTP server for downloading to the IP Phone. If the IP phone's files are located in a
sub-directory beneath the server's root directory, the relative path to that sub-directory
should be entered in this field. Enter the path name in the form folderX\folderX\folderX. For
example, ipphone\6867i\configfiles.
• Optional: You can also configure an alternate TFTP server if required. If "Use Alternate
TFTP" is enabled, you must also enter an IP address or qualified domain name for the
alternate server in the "Alternate TFTP" field. You can also enter a path name for the
alternate TFTP server in the "Alternate TFTP Path" field.
FTP
• Enter an IP address or fully qualified domain name in the "FTP Server" field.
• Enter the path name in the "FTP Path" field for which the configuration files reside on the
FTP server for downloading to the IP Phone. If the IP phone's files are located in a
sub-directory beneath the server's root directory, the relative path to that sub-directory
should be entered in this field. Enter the path name in the form folderX\folderX\folderX. For
example, ipphone\6867i\configfiles.
• Optional: You can enter a username and password for accessing the FTP server if
required.
• Enter a username for a user that will access the FTP server in the "FTP User Name" field.
• Enter a password for a user that allows access to the FTP server in the "FTP Password"
field.
HTTP
• Enter an IP address or fully qualified domain name in the "HTTP Server" field.
• Enter the path name in the "HTTP Path" field for which the configuration files reside on the
HTTP server for downloading to the IP Phone. If the IP phone's files are located in a
sub-directory beneath the server's root directory, the relative path to that sub-directory
should be entered in this field. Enter the path name in the form folderX\folderX\folderX. For
example, ipphone\6867i\configfiles.
• Enter the HTTP port number in the "HTTP Port" field that the server uses to load the
configuration to the phone over HTTP.
• Optional: You can enter a list of users to be authenticated when they access the HTTP
server in the "XML Push Server List (Approved IP Addresses)" field.
HTTPS
• Enter an IP address or fully qualified domain name in the "HTTPS Server" field.
• Enter the path name in the "HTTPS Path" field for which the configuration files reside on
the HTTP server for downloading to the IP Phone. If the IP phone's files are located in a
sub-directory beneath the server's root directory, the relative path to that sub-directory
should be entered in this field. Enter the path name in the form folderX\folderX\folderX. For
example, ipphone\6867i\configfiles.
• Enter the HTTPS port number in the "HTTPS Port" field that the server uses to load the
configuration to the phone over HTTPS.
• Optional: You can enter a list of users to be authenticated when they access the HTTP
server in the "XML Push Server List (Approved IP Addresses)" field.
Note: For more information on configuring the HTTPS security method, HTTP to
HTTPS redirect, and HTTPS server blocking for HTTP XML POSTs, see the section,
"HTTPS Client/Server Configuration"
4-107
on .
page 4-33