Mitel 6867i Administrator's Manual page 370

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
Valid values for this parameter are 0 (enabled) and 1 (disabled).
If this parameter is set to 1, the key is not active and is ignored if pressed by the user. For
"redial disabled" the value of 1 does not save the dialed number to the "Outgoing Redial List".
If this parameter is set to 0, the key is active and can be pressed by the user.
This feature is configurable via the configuration files only.
Use the following procedure to enable/disable the Redial, Xfer, and Conf keys.
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
"Mapping Key Settings"
MAPPING REDIAL AND CONF KEYS AS SPEEDDIALS
You can map the Redial and Conference keys on the IP phone to use as Speeddial keys.
When the Redial or Conference key is pressed, the number configured for the key
automatically speeddials. If no number is configured, the Redial and Conference keys return
to their original functionality.
You can configure this feature using the configuration files or the Mitel Web UI.
Use the following procedures to set the Redial and Conf keys as Speeddial keys.
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
"Mapping Key Settings"
MITEL WEB UI
1. Click on Basic Settings->Preferences.
2. In the Key Mapping section, enter a number in the "Map Redial Key To" field, that the IP
phone will use to speeddial when the Redial key is pressed.
3. Enter a number in the "Map Conf Key To" field, that the IP phone will use to speeddial
when the Conf Key is pressed.
4. Click Save Settings to save your changes.
5-109
on .
page A-212
on .
page A-212