Mitel 6867i Administrator's Manual page 446

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
4. In the Value field, enter call URI and voicemail URI separated by a semi-colon, as per the
following syntax: [call URI];[voicemail URI]. For example,
+33123456,,,3456#0000#@domain;sip:voicemail_peter@domain.
Notes:
1. As the example above illustrates, pauses and DTMF are supported for the call
2. Ensure that no spaces are added between the call URI and the voicemail URI
3. If only one URI is provided, the value will be used for the voicemail URI and the
5. In the Line field, select the line for which you want to use the key functionality.
6. Click Save Settings.
Configuring a Speeddial/MWI Key Using the Configuration Files
To configure a Speeddial/MWI key using the configuration files, you must enter "speeddialmwi"
for the key type. For the label (6867i/6869i/6873i/M685i only), enter a key label to assign to the
Speeddial/MWI key (e.g. Peter). For the value, enter call URI and voicemail URI separated by
a semi-colon, as per the following syntax: [call URI];[voicemail URI]. For example,
+33123456,,,3456#0000#@domain;sip:voicemail_peter@domain.
Notes:
1. As the example above illustrates, pauses and DTMF are supported for the call URI.
2. Ensure that no spaces are added between the call URI and the voicemail URI when
defining the key value.
3. If only one URI is provided, the value will be used for the voicemail URI and the call
URI will be left as undefined.
For the line, enter the line for which you want to use the key functionality (e.g. 3). The following
parameters are examples you can use to configure a Speeddial/MWI key using the configuration
files:
For Top Softkeys
topsoftkey1 type: speeddialmwi
topsoftkey1 label: Peter
topsoftkey1 value:
+33123456,,,3456#0000#@domain;sip:voicemail_peter@domain
topsoftkey1 line: 3
For Programmable Keys
prgkey1 type: speeddialmwi
prgkey1 value:
+33123456,,,3456#0000#@domain;sip:voicemail_peter@domain
prgkey1 line: 3
5-185
URI.
when defining the key value.
call URI will be left as undefined.