ENABLE MICROPHONE DURING EARLY MEDIA
PARAMETER –
sip early media mute mic
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
CODEC NEGOTIATION BEHAVIOR
PARAMETER –
sip single codec reply in sdp
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
GROUP PAGING RTP SETTINGS
PARAMETER –
paging group listening
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
Operational, Basic, and Advanced Parameters
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables or disables the microphone while in early media.
Boolean
1 (disabled)
0-1
0 (enables mic during early media)
1 (disables mic during early media)
sip early media mute mic: 0
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies whether the phone should reply to and SDP Offer (with
several codecs defined in the media stream) with an SDP Answer
containing all the codecs present in the Offer (as per RFC 3264) or
with an SDP Answer containing just one preferred codec (as per
3GPP TS 24.229).
Boolean
0 (Disabled)
0-1
0 (Disabled - RFC 3264)
1 (Enabled - 3GPP TS 24.229)
sip single codec reply in sdp: 1
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the multicast address(es) and the port(s) on which the
phone listens for incoming multicast RTP packets.
Note: If this field is blank, Paging listening capability is disabled on
the phone.
IP Address in dotted decimal format/Port #
N/A
The valid port range is from 1 to 65535.
paging group listening: 224.0.0.2:10000,239.0.1.20:15000
A-207