Mitel 6867i Administrator's Manual page 942

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
PARAMETER –
expmodX keyN value
DESCRIPTION
A-244
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
The text label that displays on the IP phone for the softkey on the
Expansion Module.
The "expmodX keyN value" parameter can be set for the following
softkey types only:
• speeddial (you can enter a speeddial number for this field; optionally,
you can also enter a prefix for the speeddial value to allow the phone
to dial the prefix after you press the Speeddial key; you then enter
the rest of the number from the keypad on the phone).
• line
• blf
• spre
• xml
• park
• pickup
• blfxfer
• speeddialxfer
• speeddialconf
• speeddialmwi
• redial
• filter
• icom
• paging
Notes:
• For speeddial the value is the phone number, extension, or prefix
number to enter for the softkey.
• For line the value is optional; for example L4.
• For blf the value is the extension you want to monitor.
• For spre the value is dependent on services offered by server.
• For park and pickup valid values, see Chapter 5, the section,
"Park/Pickup Call Server Configuration Values"
• For xml you can specify a URI to use for this XML softkey. The
variables you can use with the XML softkey URI are:
• $$SIPUSERNAME$$
• $$SIPAUTHNAME$$
• $$PROXYURL$$
• $$LINESTATE$$
• $$LOCALIP$$
• $$REMOTENUMBER$$
• $$DISPLAYNAME$$
• $$SIPUSERNAME$$
• $$INCOMINGNAME$$
• $$CALLDURATION$$
• $$CALLDIRECTION$$
on page 5-220.