Mitel 6867i Administrator's Manual page 605

For the 6873i:
IP PHONE UI
1. Press to enter the Options List.
2. Press the Advanced softkey.
3. Enter the Administrator password and press the blue Enter key. Default is "22222".
4. Press the Network icon.
Note: If required, swipe left on the screen to navigate to the second page of options.
5. Press the 802.1x icon.
6. In the Basic Settings > EAP Type field select one of the following:
• Disable (Default)
• EAP-MD5 (phone uses MD5 authentication)
• EAP-TLS (phone uses TLS authentication)
Note: The 802.1x Protocol is disabled by default. If you select EAP-TLS
authentication, you must use the configuration files or the Mitel Web UI to configure
the certificates and private key for the phone.
7. In the EAP-TLS Settings > Identity field, enter a username used for authenticating the
phone.
8. In the EAP-TLS Settings > MD5 Password field, enter the password used for authenti-
cating the phone.
Note: You must restart the phone for the 802.1x authentication parameters to take
affect.
9. Press the Save softkey.
10. Restart the phone for the selection to take affect.
Advanced Operational Features
6-27