Mitel 6867i Administrator's Manual page 474

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
6867i/6869i/6873i Softkeys
STATE
Idle
Seized
Progressing
(outgoing call)
Alerting
(incoming call)
Active
Held
Hold Private
Bridge-Active
Bridge-Held
LOCAL MODE SCA BEHAVIOR
If the phone is configured for Shared Call Appearance (SCA) functionality (the line mode is
configured as BroadSoft SCA), the phone needs to send a SUBSCRIBE message to get a dial
tone to make a call. If the network device the phone is connected to loses WAN Internet
connectivity, the phone transitions into local mode.
In previous releases, the phone would continue to function (make/receive calls) locally when
in local mode, but only until the SCA subscription expired. Once the subscription expired, the
phone was no longer able to send a SUBSCRIBE message and therefore no dial tone was
available to make a call.
Starting with Release 4.2.0. when the phone looses connection and is in local mode with the
network device, the phone switches to the generic line mode instead of the BroadSoft SCA line
mode. This ensures users are able to make and receive calls as the phone does not need to
send the SUBSCRIBE message to get a dial tone to make a call. Once the phone is connected
to the network device again, the phone leave local mode and switches back to its original
BroadSoft SCA line mode.
5-213
SOFTKEY LED
FOR LOCAL
SOFTKEY IMAGE (6867I/6869I
FOR LOCAL ONLY)
Off
Solid Red
Solid Red
Flashing Red
Solid Red
Slow Flashing
Red
(Blinking)
Slow Flashing
Red
(Blinking)
Solid Red
Slow Flashing
Red
(Blinking)
SOFTKEY LED
FOR REMOTE
SOFTKEY IMAGE (6867I/6869I
FOR REMOTE ONLY)
Off
Solid Red
Solid Red
N/A
Solid Red
Slow Flashing
Red
(Blinking)
Solid Red
(Blinking)
Solid Red
Solid Red
(Blinking)