Mitel 6867i Administrator's Manual page 806

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
PARAMETER –
sips private key
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
A-108
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Allows you to specify a Private Key file to use when the phone uses
the TLS transport protocol to setup a call.
This parameter is required when configuring TLS (optional for
Persistent TLS.)
You can use this parameter in three ways:
• To download no private key
• To download a private key from the original configuration server
• To download a private key from another specified server
To download a specific file, the string value MUST HAVE A
FILENAME at the end of the string. For example:
sips private key:
ftp://admin:admin!@1.2.3.4:50/path/phonesPrivatekey.pem
where "path" is the directory and "phonesPrivateKey.pem" is the
filename. If you do not specify a filename, the download fails.
See examples for each below.
Note: The key file must use the format ".pem". To create specific
private key files to use on your IP phone, contact Mitel Technical
Support.
<filename>.pem
N/A
N/A
The following example downloads no private key file:
sips private key:
The following example downloads the private key file from the
original configuration server.
sips private key: phonesPrivateKey.pem
The following example uses FTP to download the firmware file
"phonesPrivateKey.pem" (private key file) from the "path" directory
on server 1.2.3.4 using port 50:
sips private key:
ftp://admin:admin!@1.2.3.4:50/path/phonesPrivateKey.pem