Mitel 6867i Administrator's Manual page 797

PARAMETER –
sip registration timeout retry
timer
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
sip registration renewal timer
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
Operational, Basic, and Advanced Parameters
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the length of time, in seconds, that the phone waits until it
re-attempts to register after a REGISTER message times out.
If this parameter is set lower than 30 seconds, the phone uses a
minimum timer of 30 seconds.
Integer
120
30 - 2147483647
sip registration timeout retry timer: 150
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
The threshold value, in seconds, prior to expiration, that the phone
renews registrations. The phone will automatically send registration
renewals half-way through the registration period, unless half-way is
more than the threshold value.
For example, if the threshold value is set to 60 seconds and if the
registration period is 600 seconds, the renewal REGISTER message
will be sent 60 seconds prior to the expiration, as half-way (600/2) >
60. If the registration period was 100 seconds, then the renewal
would be sent at the half-way point as (100/2) < 60.
Integer
15
0 - 2147483647
Note: The value set for this parameter should be between 0 and the
value set for the registration period.
sip registration renewal timer: 10
A-99