Mitel 6867i Administrator's Manual page 863

PARAMETER –
action uri registered
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER –
action uri registration event
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
Operational, Basic, and Advanced Parameters
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the URI for which the phone executes a GET on when a
successful registration event occurs. This parameter can use the
following variables:
$$SIPUSERNAME$$
$$SIPAUTHNAME$$
$$PROXYURL$$
$$LINESTATE$$
$$LOCALIP$$
Note: The "action uri registered" parameter executes on the first
successful registration of each unique line configured on the phone.
Fully qualified URI
N/A
Up to 128 ASCII characters
action uri registered: http://10.50.10.14/registered.php?auth
name=$$SIPAUTHNAME$$
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the URI that the phone executes a GET on, when a
registration event change occurs. This parameter uses the following
variables to determine the state of the event:
$$REGISTRATIONSTATE$$
$$REGISTRATIONCODE$$
Note: If defined, this action URI is also called upon at startup if the
SIP registrar IP has not been configured (i.e. the IP is 0.0.0.0).
Note: This action URI is not called when the same event is repeated
(for example, a timeout occurs again when registration is already in
a timeout state.)
String
N/A
Any valid URI
action uri registration event:
http://10.30.100.39/PHPtests/actionuri.php?action=RegEvt&regstat
e=$$REGISTRATIONSTATE$$&regcode=$$REGISTRATIONCOD
E$$
A-165