Configurable Blf And Blf/List Key Behavior When In An Active Call; Ring Splash Settings - Mitel 6867i Administrator's Manual

Softkey/Programmable Key/Keypad Key/Expansion Module Key/Hard Key Parameters
CONFIGURABLE BLF AND BLF/LIST KEY BEHAVIOR WHEN IN AN
ACTIVE CALL
Note: Applicable to the 6865i, 6867i, 6869i, and 6873i IP Phones only.
PARAMETER –
blf key mode
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE

RING SPLASH SETTINGS

Note: Applicable to the 6865i, 6867i, 6869i, and 6873i IP Phones only.
PARAMETER –
play a ring splash
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the behavior when a BLF or BLF/List key is pressed
If the parameter is defined as "0"
during an active call.
(default), the BLF or BLF/List number will be sent as DTMF
tones in the active call. If defined as "1", the active call will be
placed on hold and the phone will place a call to the BLF or
BLF/List number using the next available line
Integer
0
0 - 1
0 (DTMF in active call)
1 (Active call placed on hold and BLF or BLF/List number dialed out
using the next available line)
blf key mode: 1
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Enables or disables the playing of a short ring splash when there is
an incoming call on a BLF-monitored extension.
Integer
0 (Disabled)
0 - 2
0 (Disabled)
1 (Enabled for idle state only)
2 (Enabled for idle state and active call state)
Note: Playing a BLF ring splash while in an active call state
(i.e. defining the parameter as "2") is only available to the
6865i, 6867i, 6869i, and 6873i IP phones.
play a ring splash: 2
A-259