Mitel 6867i Administrator's Manual page 292

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
6. Press the Save softkey to save your changes.
For the 6873i:
1. Press
2. Press the Time and Date icon.
3. Press the Set Date and Time icon.
4. Ensure there is a checkmark in the box corresponding to the Use Network Time setting.
If there is no checkmark, press the checkbox to enable the Use Network Time setting.
5. Enter an IP address or domain name for the time server in the Time Server 1, Time Server
2, or Time Server 3 fields.
6. Press the Save softkey to save your changes.
Setting Time Server Using the Mitel Web UI
Use the following procedure to set the Time Server and optionally set the IP Address of Time
Servers 1, 2, and/or 3.
MITEL WEB UI
1. Click on Basic Settings->Preferences->Time and Date Setting.
To enable/disable Time Server:
2. The "NTP Time Server" field is enabled by default. If you need to disable the Time Server,
uncheck the box. The Time Server 1, 2, and 3 fields are grayed out when disabled.
To set Time Server 1, 2, and/or 3:
Note: The "Time Server" field must be enabled to enter values in the "Time Server 1,
2, and 3" fields.
3. In the "Time Server 1", "Time Server 2", and/or "Time Server 3" field(s), enter the IP
address of the Time Server 1, 2, and/or 3 in your network, in dotted decimal format.
For example, 132.234.5.4
4. Click Save Settings to save your changes.
5-31
to enter the Options List.