Mitel 6867i Administrator's Manual page 443

Refer to the following in Appendix A to configure a Speeddial/Conf key on the IP phone using
the configuration files.
CONFIGURATION FILES
To set a Speeddial/Conf key using the configuration files, see Appendix A,
Key/Keypad Key/Expansion Module Key/Hard Key Parameters"
CONFIGURING THE SPEEDDIAL/CONF KEY USING THE MITEL WEB UI
Use the following procedure to configure the Speeddial/Conf Key using the Mitel Web UI.
MITEL WEB UI
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module Keys.
2. In the "Type" field, select Speeddial/Conf from the list of options.
3. In the "Label" field, enter a key label to assign to the Speeddial/Conf key (for example,
"Sales").
4. In the "Value" field, enter the number that the phone dials when the Speeddial/Conf key is
pressed (for example, "4556").
5. In the "Line" field, select the line for which you want to use the key functionality.
6. For phones with softkeys:
7. In the States field, select the state(s) (idle, connected, incoming, outgoing, busy) for which
you want to use on the key.
Note: States are not applicable to programmable keys (6863i, 6865i).
8. Click Save Settings to save your changes.
Operational Features
"Softkey/Programmable
on .
page A-217
5-182