Mitel 6867i Administrator's Manual page 504

Mitel 6800 Series SIP Phone Release 4.2.0 Administrator Guide
• No Answer: Forwards incoming calls to a specified number if the call has not been
answered for the specified number of rings.
Notes:
1. Pressing the 2 navigation key moves the selection to the next field/checkbox.
2. If All and Busy and No Answer are all enabled (and/or if the account has DND
3. Pressing the CopyToAll key copies the call forward number of the Call Forward
3. If configuring a forwarding number for the No Answer state, navigate to the No. Rings field
and press the 3 or 4 navigation keys to change the desired number of rings.
4. Using the 2 navigation key, move to the On checkbox beside the respective Call Forward
mode and press the
5. Press the Save softkey to save your changes.
Note: In Phone mode, the configuration applies to all the accounts on the phone.
CFWD in Phone Mode (6873i)
IP PHONE UI
1. Press the configured Call Fwd softkey or press
The Call Forward screen displays and is applicable to all accounts configured on the phone.
2. Enter forwarding numbers using the dialpad keys for any of the following states:
• All: Forwards all incoming calls for the respective account to the specified number.
5-243
enabled), the All settings take precedence over Busy and No Answer.
mode in focus to every Call Forward mode of that account. For example, if you
have the cursor pointing at the All state and has a call forward phone number
configured, pressing the CopytoAll key assigns the same phone number to the
Busy and No Answer states as well.
button to enable the Call Forward mode.
6873i CFWD Phone Mode
and press the Call Forward icon.