11. Press Done (3 times) to finish configuring the configuration server protocol for the IP phone.
Note: The session prompts you to restart the IP phone to apply the configuration
settings.
12. Select Restart.
For the 6867i/6869i:
1. Press
on the phone to enter the Options List.
2. Press the Advanced softkey.
3. Enter the Administrator password using the keypad. Default is "22222".
4. Select Network > Ethernet Ports.
5. With LAN Port highlighted, press the right navigation key and select a negotiation method
to use on port 0. Valid values are:
•
AutoNegotiation
•
Full 10Mbps
•
Full 100Mbps
•
Full 1000Mbps
•
Half 10Mbps
•
Half 100Mbps
•
Half 1000Mbps
6. Default is AutoNegotiation.
7. Press the left navigation key and press down to highlight PC Port.
8. Select a negotiation method to use on port 1. Valid values are:
•
AutoNegotiation
•
Full 10Mbps
•
Full 100Mbps
•
Full 1000Mbps
•
Half 10Mbps
•
Half 100Mbps
•
Half 1000Mbps
9. Default is AutoNegotiation.
10. Press the Save softkey.
11. Restart the phone for the selection to take affect.
For the 6873i:
1. Press
on the phone to enter the Options List.
2. Press the Advanced softkey.
3. Enter the Administrator password and press the blue Enter key. Default is "22222".
Network Settings
4-28