Ricoh OR-C1 Field Service Manual page 86

2. Installation
2
6. Attach the rear joint bracket [A] (
7. Attach the front joint bracket [B] (
8. Slowly push the finisher to the left side of the machine, keeping its front door open until the brackets
[A] [B] go into their slots.
9. Push the lock lever [C], and then secure it (Long knob screw x 1).
10. Close the front door of the finisher.
11. Connect the finisher connector [D] to the machine.
84
x 1; M4x25).
x 2; M4x25).