Reboot/System Setting Reset; Software Reset; System Settings And Copy Setting Reset - Ricoh OR-C1 Field Service Manual

Reboot/System Setting Reset

Software Reset

You can reboot the software with one of the following two procedures:
1. Turn the main power switch off and on.
2. Press and hold down
release both buttons. After "Now loading. Please wait" shows for a few seconds, the copy window
will open. The machine is ready for normal operation.

System Settings and Copy Setting Reset

System Setting Reset
The system settings in the UP mode can be reset to their defaults. Use the following procedure.
1. Press User Tools/Counter
2. Hold down and then press System Settings.
• You must press
3. Press yes when the message prompts you to confirm that you want to reset the system settings.
4. Press exit when the message tells you that the settings have been reset.
Copier Setting Reset
Use the following procedure to reset the copy settings in the UP mode to their defaults.
1. Press User Tools/Counter
2. Hold down and then press Copier/Document Server Settings.
and together for over 10 seconds. When the machine beeps once,
.
first.
.
Reboot/System Setting Reset
5
299