Ricoh OR-C1 Field Service Manual page 555

Paper Supply Alarm (0:Off
1
1:On)
Staple Supply Alarm (0:Off
2
1:On)
Toner Supply Alarm (0:Off
3
1:On)
80 Toner Call Timing
128* interval: Others
132* Interval: A3
133* Interval: A4
134* Interval: A5
141* Interval: B4
142* Interval: B5
160* Interval: DLT
164* Interval: LG
166* Interval: LT
172* Interval: HLT
Switches the control call on/off for the paper supply.
DFU
0: Off, 1: On
0: No alarm.
1: Sets the alarm to sound for the specified number
transfer sheets for each paper size (A3, A4, B4, B5,
DLT, LG, LT, HLT)
Switches the control call on/off for the stapler installed
in the finisher. DFU
0: Off, 1: On
0: No alarm
1: Alarm goes off for every 1K of staples used.
Switches the control call on/off for the toner end. DFU
0: Off, 1: On
If you select "1" the alarm will sound when the copier
detects toner end.
Changes the timing of the "Toner Supply Call" via the
@Remote, when the following conditions occur.
0: At replacement
1: At near end
The "Paper Supply Call Level: nn" SPs specify the paper
control call interval for the referenced paper sizes. DFU
[00250 to 10000 / 1000 / 1 Step]
System SP Tables-5
4
197