Ricoh OR-C1 Field Service Manual page 492

4. Appendix: Service Program Mode Tables
1 MainMotor:150
2 MainMotor:122
10 Duplex:Low
11 Duplex:High
24 Reverse:Low
29 Reverse:High
Feed Cl Re-energize
4
Adjusts the paper feed amount allowed by the clutch after correcting the skew at
1903*
registration. When paper jams occur after restarting paper feed after registration,
increase the value to help the registration roller feed the paper.
1 By-pass Feed
2 Tray 1 Feed
3 Other Trays
1907* Paper Feed Timing Adj.
1 Feed Solenoid ON
5 Inverter Stop Position
15 Re-Feed Stop Position
20 Bank1: Feed Solenoid ON: Plain
21 Bank1: Feed Solenoid ON: Middle Thick
134
[–4 to 4 / 0 / 0.01 %/step]
[–4 to 4 / 0 / 0.01 %/step]
[–4 to 4 / 0 / 0.01 %/step]
[–4 to 4 / 0 / 0.01 %/step]
[–4 to 4 / 0 / 0.01 %/step]
[–4 to 4 / 0 / 0.01 %/step]
[0 to 10 / 5 / 1 mm/step]
[-10 to 10 / 0 / 1mm /step]
The feed solenoid turns on A mm before
the pick-up roller feed out the trailing
edge of the paper.
A=(Original length – 80) x B / 100
B=setting value
[35 to 85 / 60 / 5% /step]