Ricoh OR-C1 Field Service Manual page 475

No. Type
Log Data Error 2
• An encryption module not installed
-002
1. Disable the log encryption setting with SP9730-004 ("0" is off.)
2. Install the DESS module.
Log Data Error 3
• Invalid log encryption key due to defective NVRAM data
-003
1. Initialize the HDD with SP5832-004.
2. Disable the log encryption setting with SP9730-004 ("0" is off.)
Log Data Error 4
-004 • Unusual log encryption function due to defective NVRAM data
Initialize the HDD with SP5832-004.
Log Data Error 5
• Installed NVRAM or HDD which is used in another machine
-005
1. Reinstall the previous NVRAM or HDD.
2. Initialize the HDD with SP5832-004.
Log Data Error 99
-099 • Other than the above causes
Ask your supervisor.
No. Type
Data Overwrite Security SD card error
The 'all delete' function did not execute but the Data Overwrite Security Unit is
installed and activated.
877 B
• Defective SD card
• SD card not installed
1. Replace the NVRAM and then install the new SD card.
2. Check and reinstall the SD card.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Service Call Conditions
3
117