Ricoh OR-C1 Field Service Manual page 433

No. Type
[17]
[18]
[19]
[20]
[21]
[22]
[23]
[24]
[25]
The machine failed to detect a match between the read/write data for the
EEPROM on the BCU after 3 attempts.
• EEPROM installed incorrectly
• EEPROM defective. Turn the machine power off/on after replacing the
EEPROM.
• BCU defective.
1. Install the EEPROM correctly.
2. Replace the EEPROM.
3. Replace the BCU.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Data write error: Buffer full error
Data write error: No error code
Data read error: ID error
Data read error: Channel error
Data read error: Device error
Data read error: Communication failed error
Data read error: Communication time over error
Data read error: Communication suspended error
Data read error: Buffer full error
Service Call Conditions
3
75