Ricoh OR-C1 Field Service Manual page 556

4. Appendix: Service Program Mode Tables
5508* CC Call
1 Jam Remains
2 Continuous Jams
3 Continuous Door Open
Jam Detection: Time
11
Length
4
Jam Detection:
12
Continuous Count
13 Door Open: Time Length
SC/Alarm Setting
With NRS (New Remote Service) in use, these SP codes can be set to issue an SC call
5515*
when an SC error occurs. If this SP is switched off, the SC call is not issued when an SC
error occurs.
1 SC Call
2 Service Parts Near End Call
3 Service Parts End Call
4 User Call
6 Communication Test Call
7 Machine Information Notice
8 Alarm Notice
10 Supply Automatic Ordering Call
11 Supply Management Report Call
12 Jam/Door Open Call
198
Enables/disables initiating a call.
[0 or 1 / 1 / 1]
0: Disable
1: Enable
Sets the length of time to determine the length of an
unattended paper jam.
[3 to 30 / 10 / 1 minute]
Sets the number of continuous paper jams required to initiate
a call.
[2 to 10 / 5 / 1 time]
Sets the length of time the remains opens to determine when
to initiate a call.
[3 to 30 / 10 / 1 minute]
[0 or 1 / 1 / - ]
0: Off
1: On
[0 or 1 / 1 / - ]
0: Off
1: On