Ricoh OR-C1 Field Service Manual page 431

No. Type
ID2 mismatching
ID2 for @Remote certification is mismatching between the controller board and
NVRAM.
652 C
• Used controller board installed
• Used NVRAM installed
1. Install the correct controller board or new controller board.
2. Install the correct NVRAM or new NVRAM.
No. Type
ID2 error
ID2 stored in the NVRAM is incorrect.
653 B
• Used NVRAM installed
Clear the ID2 in the NVRAM, and then input a correct ID2.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Service Call Conditions
3
73