Ricoh OR-C1 Field Service Manual page 448

3. Appendix: Service Call Conditions
No. Type
- -
3
No. Type
793-
B
04
794-
D
04
- -
No. Type
793-
B
05
794-
D
05
90
Details (Symptom, Possible Cause, Troubleshooting Procedures)
The machine does not detect a correct signal from the pick-up roller HP sensor
while the pick-up roller contact motor is operating. The 1
nd
a jam error, and the 2 failure issues this SC code.
• Defective pick-up roller contact motor
• Loosen connection
• Motor overload
• Defective pick-up roller HP sensor
1. Replace the pick-up roller HP sensor.
2. Replace the pick-up roller contact motor.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Exit guide plate motor error with 1-bin tray (D586)
Exit guide plate motor error without 1-bin tray (D586)
The machine does not detect a correct signal from the exit guide plate HP sensor
while the exit guide plate motor is operating. The 1st detection failure issues a jam
error, and the 2nd failure issues this SC code.
• Defective exit guide plate motor
• Loosen connection
• Motor overload
• Defective exit guide plate HP sensor
1. Replace the exit guide plate HP sensor.
2. Replace the exit guide plate motor.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Output tray motor error with 1-bin tray (D586)
D error without 1-bin tray (D586)
st
detection failure issues