Ricoh OR-C1 Field Service Manual page 653

• Reading user stamp data is not counted.
• If a job is cancelled, the pages output as far as the cancellation are counted.
• If the scanner application scans and stores 3 B5 sheets and 1 A4 sheet, the S: count is 4.
• If pages are copied but not stored on the document server, these counters do not change.
• If both sides of 3 A4 sheets are copied and stored to the document server, the C: count is 6 and the
L: count is 6.
• If you enter document server mode then scan 6 pages, the L: count is 6.
ADF Org Feeds
8221
These SPs count the number of pages fed through the ADF for front and back side
scanning.
1 Front
2 Back
• When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count is 1.
• If a jam occurs during the job, recovery processing is not counted to avoid double counting. Also,
the pages are not counted if the jam occurs before the first sheet is output.
Scan PGS/Mode
8231
These SPs count the number of pages scanned by each ADF mode to determine
the work load on the ADF.
1 Large Volume
2 SADF
Number of front sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Front side
count is the same as the number of pages fed for either simplex or
duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Front
side count is the same as the number of pages fed for duplex front
side scanning. (The front side is determined by which side the user
loads face up.)
Number of rear sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Back count
is the same as the number of pages fed for duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Back
count is the same as the number of pages fed for duplex rear-side
scanning.
Selectable. Large copy jobs that cannot be loaded in the
ADF at one time.
Selectable. Feeding pages one by one through the ADF.
[0 to 9999999/ 0 / 1]
[0 to 9999999/ 0 / 1]
System SP Tables-8
4
295