Ricoh OR-C1 Field Service Manual page 338

6. Troubleshooting
Jam Code
SP
Finisher Exit Motor
7-504-109
(D588)
7-504-130 FIN Entrance (D589)
FIN Proof Tray Exit
7-504-131
(D589)
7-504-132 FIN Shift Tray (D589)
6
7-504-133 FIN Staple Exit (D589)
7-504-134 FIN Exit (D589)
7-504-135 Finisher Fold (D589)
7-504-136 FIN Fold Exit (D589)
Exit Guide Gate Motor
7-504-137
(D589)
FIN Staple Shift Motor
7-504-138
(D589)
336
Display
Stack belt HP sensor does not turn off after the
stack feed-out belt has moved from its home
position.
Stack feed-out belt HP sensor does not turn on
after the stack feed-out belt has returned to its
home position.
Paper does not reach the entrance sensor or
stay at the entrance sensor.
Paper does not reach the proof tray exit
sensor or stays at the proof tray exit sensor.
Paper does not reach the shift tray exit sensor
or stays at the shift tray exit sensor.
Paper does not reach the staple tray exit
sensor or stays at the staple tray exit sensor.
Exit sensor does not detect paper.
Paper does not reach the fold unit entrance
sensor or stay at the fold unit entrance sensor.
Paper does not reach the fold unit exit sensor
or stay at the fold unit exit sensor.
Exit guide plate HP sensor does not turn off
after the guide plate has moved from its
position.
Exit guide plate HP sensor does not turn on
after the guide plate has returned to its
position.
Stapler unit HP sensor does not turn off after
the stapler unit has moved from its position.
Stapler unit HP sensor does not turn on after
the stapler unit has returned to its position.
Description
LCD
Display
R3-R5
R1-R3
R1-R3
R1-R3
R4-R6
R4-R6
R7-R11
R7-R11
R1-R3
R7-R11