Ricoh OR-C1 Field Service Manual page 596

4. Appendix: Service Program Mode Tables
On/Off (1:ON 0:OFF)
Switches on the debug log feature. The debug log cannot be captured until this feature
is switched on.
1
[0 or 1 / 0 / 1]
0: OFF
1: ON
Target (2: HDD 3: SD)
Selects the destination where the debugging information generated by the event
selected by SP5858 will be stored if an error is generated
4
2
[2 to 3 / 2 / 1]
2: HDD
3: SD Card
Save to HDD
5
Specifies the decimal key number of the log to be written to the hard disk.
Save to SD Card
6
Specifies the decimal key number of the log to be written to the SD Card.
Copy HDD to SD Card (Latest 4 MB)
Takes the most recent 4 MB of the log written to the hard disk and copies them to the
SD Card.
9
A unique file name is generated to avoid overwriting existing file names on the SD
Card. Up to 4MB can be copied to an SD Card. 4 MB segments can be copied one by
one to each SD Card.
Copy HDD to SD Card Latest 4 MB Any Key)
Takes the log of the specified key from the log on the hard disk and copies it to the SD
Card.
10
A unique file name is generated to avoid overwriting existing file names on the SD
Card. Up to 4 MB can be copied to an SD Card. 4 MB segments can be copied one
by one to each SD Card. This SP does not execute if there is no log on the HDD with no
key specified.
Erase HDD Debug Data
11
Erases all debug logs on the HDD
238