Ricoh OR-C1 Field Service Manual page 341

Jam Code
Display
SP
Front Jogger Motor
7-504-164
(D585)
Rear Jogger Motor
7-504-165
(D585)
7-504-166 Exit Motor (D585)
FIN Staple Shift Motor
7-504-167
(D585)
7-504-168 FIN Staple Motor (D585)
FIN Tray Lift Motor
7-504-169
(D585)
FIN Stack Height SOL
7-504-170
(D585)
Description
Front fence HP sensor does not turn off after
the front fence has moved from its home
position.
Front fence HP sensor does not turn on after
the front fence has returned to its home
position.
Rear fence HP sensor does not turn off after
the rear fence has moved from its home
position.
Rear fence HP sensor does not turn on after
the rear fence has returned to its home
position.
Feed out belt HP sensor does not turn on after
the feed out belt motor has turned off.
Feed out belt HP sensor does not turn off after
the feed out belt motor has turned on.
Stapler HP sensor does not turn off after the
finisher stapler movement motor has turned
on.
Stapler HP sensor does not turn on after the
finisher stapler movement motor has turned
off.
Corner stapler does not finish stapling after a
specified time.
Paper height sensor does not turn on after the
output tray has lifted up.
Paper height sensor does not turn off after the
output tray has moved down.
Paper height sensor does not turn on after the
edge depressor has retracted from the stack.
Paper height sensor does not turn off after the
edge depressor has touched the top of the
stack.
Jam Detection
LCD
Display
R1
R1
6
R1
R1
R1
R1
R1
339