Ricoh OR-C1 Field Service Manual page 534

4. Appendix: Service Program Mode Tables
1 Scan New Chart
2 Recall Previous Chart
4 Set Standard Chart
5* Chromaticity Rank
IPU Image Pass [Path] Selection RGB Frame Memory
4
Selects the image path. Enter the number to be selected using the 10-key pad.
[0 to 11/ 2 / 1]
4991
Highlight Correction
4993*
Selects the level of highlight correction.
176
0 Scanner input RGB images
1 Scanner I/F RGB images
2 RGB images done by Shading correction (Shading ON, Black offset ON)
3 Shading data
4 Inner pattern data: Gray scale
5 RGB images done by Line skipping correction
6 RGB images done by Digital AE
7 RGB images done by Vertical line correction
8 RGB image done by Scanner gamma correction
9 RGB image done by Filtering correction
10 RGB images done by Full color ADS
11 RGB image done by Color correction
Executes new chart scanning.
Recalls the previous scanned chart.
Restores a new chart data as a standard chart data.
Adjusts chromaticity rank. When replacing the scanner
lamp, select a number according to the barcode on the
new scanner lamp.
[0 to 255 / 0 / 1]