Ricoh OR-C1 Field Service Manual page 672

4. Appendix: Service Program Mode Tables
8681
8683
• This counts pages sent from a PC using a PC fax application, from the PC through the copier to the
destination.
• When sending the same message to more than one place using broadcasting, the pages are only
counted once. (For example, a 10-page fax is sent to location A and location B. The counter goes
up by 10, not 20.)
4
8691
8692
8693
8694
8695
8696
Note
• Print jobs done with Web Image Monitor and Desk Top Binder are added to the count.
• If several documents are merged for sending, the number of pages stored are counted for the
application that stored them.
• When several documents are sent by a Fax broadcast, the F: count is done for the number of
pages sent to each destination.
8701
314
T:PCFAX TXPGS
F:PCFAX TXPGS
T:TX PGS/LS
C:TX PGS/LS
F:TX PGS/LS
P:TX PGS/LS
S:TX PGS/LS
L:TX PGS/LS
TX PGS/Port
These SPs count the number of pages sent by the physical port used to send them.
For example, if a 3-page original is sent to 4 destinations via ISDN G4, the count
for ISDN (G3, G4) is 12.
1 PSTN-1
2 PSTN-2
3 PSTN-3
4 ISDN (G3,G4)
These SPs count the number of pages sent by PC Fax.
These SPs are provided for the Fax application only,
so the counts for SP8681 and SP8683 are the same.
[0 to 9999999/ 0 / 1]
These SPs count the number of pages sent from the
document server. The counter for the application that was
used to store the pages is incremented.
[0 to 9999999/ 0 / 1]
The L: counter counts the number of pages stored from
within the document server mode screen at the operation
panel. Pages stored with the Store File button from within
the Copy mode screen go to the C: counter.
[0 to 9999999/ 0 / 1]