Ricoh OR-C1 Field Service Manual page 573

Error Caused by
Response from GW URL
209 Instl Clear
250 CommLog Print
5821* Remote Service Address Japan Only
2 RCG IP Address
NVRAM Data Upload
5824
Uploads the NVRAM data to an SD card. Push Execute.
Note: When uploading data in this SP mode, the front door must be open.
Attempted dial up overseas without the correct
-2385
international prefix for the telephone number.
-2387 Not supported at the Service Center
-2389 Database out of service
-2390 Program out of service
-2391 Two registrations for same device
-2392 Parameter error
-2393 RCG device not managed
-2394 Device not managed
-2395 Box ID for RCG device is illegal
-2396 Device ID for RCG device is illegal
-2397 Incorrect ID2 format
-2398 Incorrect request number format
Releases the machine from its Embedded RCG Gate setup.
NOTE: Turn off and on the main power switch after this
setting has been changed.
Prints the communication log.
Sets the IP address of the RCG (Remote Communication
Gate) destination for call processing at the remote service
center.
[00000000htoFFFFFFFFh/1]
System SP Tables-5
4
215