8. Peel off the platen sheet [A] and place it on the exposure glass.
9. Align the rear left corner (of the platen sheet) with the corner on the exposure glass.
10. Close the ARDF.
11. Open the ARDF and check that the platen sheet is correctly attached.
12. Attach the original setting and ARDF exposure glass cleaning decal [A] to the top cover as shown.
13. Plug in and turn on the main power switch, and then check the ARDF operation.
14. Make a full size copy. Check that the registrations (side-to side and leading edge) and image skew
are correct. If they are not, adjust the registrations and image skew, referring to the service manual
("Copy Adjustments" in the "Replacements and Adjustments").
ARDF DF3060 (D578)
2
65