Ricoh OR-C1 Field Service Manual page 622

4. Appendix: Service Program Mode Tables
3 Front Jogger Motor
4 Rear Jogger Motor
5 Staple Moving Motor
6 Stack Feed-Out Motor
7 Tray Motor
8 Staple Motor
9 Stopper Solenoid
4
FIN (RUB) Output Check
Displays the signals received from sensors and switches of the finisher.
6147
Note: In the table below, "Display" is what you see on the screen, and "Component" is
the name used in the service manuals.
Display
1 Entrance Motor
2 Carry Motor
3 Exit Motor
4 Front Jogger Motor
5 Rear Jogger Motor
6 Shift Motor
7 Hitroll Motor
8 Exit Guide Plate Motor
9 Staple Moving Motor
10 Tray Motor
11 Staple Motor
12 Stopper Motor
13 Punch Motor
14 Punch Moving Motor
264
Front Fence Motor
Rear Fence Motor
Stapler Movement Motor
Feed-Out Belt Motor
Tray Lift Motor
Stapler Motor
Stack Depressor Solenoid
500-Sheet Finisher D586
Component
Entrance Roller Motor
Feed Roller Motor
Exit Roller Motor
Jogger Fence Motor (Front)
Jogger Fence Motor (Back)
Shift Roller Motor
Pick-up Roller Motor
Exit Guide Plate Motor
Stapler Unit Motor
Output Tray Motor
Stapler Unit Motor
Stack height detection lever Motor
Punch Drive Motor
Punch Movement Motor