Ricoh OR-C1 Field Service Manual page 485

1 Fusing Idling
Reload Permit Setting:Reload
2
Temp.:Center
Reload Permit Setting:Reload
3
Temp.:Ends
Reload Permit Setting:Reload
4
Temp.:Cold:Center
Reload Permit Setting:Reload
5
Temp.:Cold:Ends
1105* Fusing Temperature Adjustment
1 Roller Center:Plain1
2 Roller Ends:Plain1
3 Roller Center:Plain2
4 Roller Ends:Plain2
5 Roller Center:M-Thick
6 Roller Ends:M-Thick
Switches fusing idling on/off.
[0 = Off / 1 = On / 2 = Off plus machine
temperature check]
Switch on if fusing on the 1st and 2nd copies is
incomplete (this may occur if the room is cold.)
Adjusts the reload temperature at the center and
both ends of the hot roller when the temperature
inside the machine is 17°C or higher.
[100 to 150 / 130 / 1°C/step]
Adjusts the reload temperature at the center and
both ends of the hot roller when the temperature
inside the machine is 16°C or lower.
[100 to 150 / 130 / 1°C/step]
Adjusts the fusing temperature at the center and
both ends of the hot roller for plain paper 1.
D120/D139:[120 to 200 / 155 / 1°C/step]
D121/D122/D140/D141:[120 to 200 /
165 / 1°C/step]
Adjusts the fusing temperature at the center and
both ends of the hot roller for plain paper 2.
D120/D139:[120 to 200 / 160 / 1°C/step]
D121/D122/D140/D141:[120 to 200 /
170 / 1°C/step]
Adjusts the fusing temperature at the center and
both ends of the hot roller for middle thick
paper.
D120/D139:[120 to 200 / 165 / 1°C/step]
D121/D122/D140/D141:[120 to 200 /
175 / 1°C/step]
System SP Tables-1
4
127