Extra Staples
More than the standard number of sheets can be stapled. This SP sets the additional
number of sheets (This Setting + Standard Number = maximum number of sheets).
• If the number of the maximum for staples is increased, and the mechanical
warranty of the unit can be guaranteed, then the setting can take effect without
6830*
changing the controller software.
• However, assurance that mechanical performance can be guaranteed is required
before changing the setting to increase the staple load for more than the maximum
in the feed/exit specifications. Raising this setting without quality assurance could
damage the machine.
Staple positions other than booklet stapling
1
[0 to 50 / 0 /1]
2 Booklet stapling
2
[0 to 50 / 0 /1]
System SP Tables-6
4
267