Sc3Xx: Image Processing - 1 - Ricoh OR-C1 Field Service Manual

SC3xx: Image Processing – 1
No. Type
Charge level output error
The PWM output level was detected higher than 50% after 10 consecutive
samplings.
• Harness of the high voltage power supply board (power pack) is loose,
302 D
• PCU connection loose or broken
1. Replace the harness of the power pack.
2. Replace the harness of the PCU.
3. Replace the PCU.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
broken.
Service Call Conditions
3
53